
Sauna LED Light Set, 12 Lamps with Lenses

Sauna LED Light Set, 12 Bulbs without Lens

0 item(s) - 0.00 €
Amount (net) | 0.00 € |
VAT | 0.00 € |
Total Amount (gross) | 0.00 € |
Комплет LED освещения для сауны, 12 лампочек с линзами
The lighting of the sauna is an important detail, which provides half of the relaxing effect in the sauna room. LED lighting will enable you to experience fabulous sensations while visiting sauna. This type of lighting has a wide range of applications. They can be used in the sauna under the ceiling, installed along the wall or under the backrest. The lighting can also be used to illuminate the steam sauna and any other wet room.
The kit includes:
- Lighting module, which consist of flexible basis with conductive path, resistors, LED’s. Covered with a soft and flexible silicone protection, thanks to which the element withstands the temperature up to 100 degrees Celsius.
Technical specifications:
- Power supply for LED lighting.
Technical specifications:
- Wireless LED Dimmer for single LED Strip. In wet place controller should be covered in plastic, waterproof boxes.
Technical specifications:
The sauna lighting set with a VPL10 1 W Led projector ensures a low energy consumption and a very long lifetime of the products. The completely silent Led projector produces just a small amount of heat and it is ideal for sauna lighting.This set is suitable for illumination of a small sauna of approx. 2 sq.m.
Not dimmable
230V / 1 W / 350 mA
3000 K / Ra >85
Projector rated IP55
A stove lens included
S-Flex 1.5 fibres: 5 x 1.5 m, 6 x 2.0 m and 5 x 2.5 m
This set is specially suited for lighting medium-sized saunas. The recommended sauna size is 5-10 m². The fibres are made of glass and they tolerate temperatures of 180 °C. They can be installed in the sauna ceiling.
The Led projector has the protection type IP65, and it can be installed inside the sauna, under the benches. The light source of the projector is a 16 W Led, with the colour temperature of 2700 K (warm) and a very high Ra index (90). The projector includes a mains dimmable power supply.
The complete ready-to-install set includes a projector, bundle of fibres, locking rings and a stove lens. The fibre size is ø 2 mm, with one thicker ø 4 mm fibre for the stove.
The number and length of fibres are as follows:
5 x 3,5 m
5 x 4,0 m
5 x 4,5 m
5 x 5,0 m
1 x 3,5 m(4 mm)
This set is specially suited for lighting medium-sized saunas. The recommended sauna size is 4-6 m². The fibres are made of glass and they tolerate temperatures of 180 °C. They can be installed in the sauna ceiling.
The Led projector has the protection type IP65, and it can be installed inside the sauna, under the benches. The light source of the projector is a 16 W Led, with the colour temperature of 2700 K (warm) and a very high Ra index (90). The projector includes a mains dimmable power supply.
The complete ready-to-install set includes a projector, bundle of fibres, locking rings and a stove lens. The fibre size is ø 2 mm, with one thicker ø 4 mm fibre for the stove.
The number and length of fibres are as follows:
5 x 3.5 m
5 x 4.0 m
1 x 3.5 m (4 mm)
The square shaped Sauna Thermometer is made of satin glass and stainless steel. The thermometer is illuminated with one 2-4 mm fibre (not included). The size of the thermometer is 120x120 mm and recess 40 mm. The height from the wall surface is 20 mm. To be installed in the wall paneling with 3 stainless steel screws.
Thermometer-hygrometer with illumination. Satin glass, stainless steel scale. It is illuminated by one fiber with a diameter of 2-6 mm or LED diodes (not included). Should be installed during lining istalation. The size is 220x207 mm, the depth of the instalation hole is 40 mm. Protrudes above surface by 20 mm. Fastened to the wall with five stainless steel screws included in the kit.
The sauna thermometer is made of satin glass and stainless steel. This fixture can be lit beautifully with a 2-6 mm fibre or LED bulb (not included). The diameter of the fixture is 120 mm.
Комплет LED освещения для сауны, 12 лампочек с линзами
The lighting of the sauna is an important detail, which provides half of the relaxing effect in the sauna room. LED lighting will enable you to experience fabulous sensations while visiting sauna. This type of lighting has a wide range of applications. They can be used in the sauna under the ceiling, installed along the wall or under the backrest. The lighting can also be used to illuminate the steam sauna and any other wet room.
The kit includes:
- Lighting module, which consist of flexible basis with conductive path, resistors, LED’s. Covered with a soft and flexible silicone protection, thanks to which the element withstands the temperature up to 100 degrees Celsius.
Technical specifications:
- Power supply for LED lighting.
Technical specifications:
- Wireless LED Dimmer for single LED Strip. In wet place controller should be covered in plastic, waterproof boxes.
Technical specifications:
The sauna lighting set with a VPL10 1 W Led projector ensures a low energy consumption and a very long lifetime of the products. The completely silent Led projector produces just a small amount of heat and it is ideal for sauna lighting.This set is suitable for illumination of a small sauna of approx. 2 sq.m.
Not dimmable
230V / 1 W / 350 mA
3000 K / Ra >85
Projector rated IP55
A stove lens included
S-Flex 1.5 fibres: 5 x 1.5 m, 6 x 2.0 m and 5 x 2.5 m
This set is specially suited for lighting medium-sized saunas. The recommended sauna size is 5-10 m². The fibres are made of glass and they tolerate temperatures of 180 °C. They can be installed in the sauna ceiling.
The Led projector has the protection type IP65, and it can be installed inside the sauna, under the benches. The light source of the projector is a 16 W Led, with the colour temperature of 2700 K (warm) and a very high Ra index (90). The projector includes a mains dimmable power supply.
The complete ready-to-install set includes a projector, bundle of fibres, locking rings and a stove lens. The fibre size is ø 2 mm, with one thicker ø 4 mm fibre for the stove.
The number and length of fibres are as follows:
5 x 3,5 m
5 x 4,0 m
5 x 4,5 m
5 x 5,0 m
1 x 3,5 m(4 mm)
This set is specially suited for lighting medium-sized saunas. The recommended sauna size is 4-6 m². The fibres are made of glass and they tolerate temperatures of 180 °C. They can be installed in the sauna ceiling.
The Led projector has the protection type IP65, and it can be installed inside the sauna, under the benches. The light source of the projector is a 16 W Led, with the colour temperature of 2700 K (warm) and a very high Ra index (90). The projector includes a mains dimmable power supply.
The complete ready-to-install set includes a projector, bundle of fibres, locking rings and a stove lens. The fibre size is ø 2 mm, with one thicker ø 4 mm fibre for the stove.
The number and length of fibres are as follows:
5 x 3.5 m
5 x 4.0 m
1 x 3.5 m (4 mm)
The square shaped Sauna Thermometer is made of satin glass and stainless steel. The thermometer is illuminated with one 2-4 mm fibre (not included). The size of the thermometer is 120x120 mm and recess 40 mm. The height from the wall surface is 20 mm. To be installed in the wall paneling with 3 stainless steel screws.
Thermometer-hygrometer with illumination. Satin glass, stainless steel scale. It is illuminated by one fiber with a diameter of 2-6 mm or LED diodes (not included). Should be installed during lining istalation. The size is 220x207 mm, the depth of the instalation hole is 40 mm. Protrudes above surface by 20 mm. Fastened to the wall with five stainless steel screws included in the kit.
The sauna thermometer is made of satin glass and stainless steel. This fixture can be lit beautifully with a 2-6 mm fibre or LED bulb (not included). The diameter of the fixture is 120 mm.